Oscam Emu Icam Best Config 2024

5/5 - (1 vote)

Oscam Emu Icam Best Config

The Oscam Emu Icam Config file is a text file that contains all of the settings for your OSCam server. It is divided into sections, each of which controls a different aspect of the server.

Here is a brief overview of the most important sections in the Oscam Emu Icam Best Config file:

[global] This section contains global settings that apply to the entire server.
[server] This section contains settings for the server itself, such as the port number and the protocol to use.
[reader] This section contains settings for each reader that is connected to the server.
[client] This section contains settings for each client that is connected to the server.
[cache] This section contains settings for the cache, which is used to store decoded cards.

The OSCam configuration file can be a bit daunting at first, but it is important to understand the different sections and settings in order to configure your server properly. You can find more information about the OSCam configuration file in the OSCam documentation.

Here is an example of a basic Oscam Emu Icam Best Config:

[global]
logfile = /var/log/oscam.log
loglevel = 3

[server]
port = 8001
protocol = camd35

[reader]
label = reader1
type = serial
device = /dev/ttyUSB0
mhz = 357

[client]
label = client1
username = user
password = pass

This configuration file will create a server that listens on port 8001 and uses the camd35 protocol. It will also create a reader that is connected to the serial device /dev/ttyUSB0 and is running at 357 MHz. Finally, it will create a client with the username “user” and the password “pass”.